Kia CERATO 2018 Owner'S Manual Download Page 10

Page: 10 / 602

1. Gasohol containing more than 10%

ethanol.

2. Gasoline or gasohol containing

methanol.

3. Leaded fuel or leaded gasohol.

CAUTION

Never use gasohol which contains

methanol. Discontinue use of any

gasohol product which impairs driva‐

bility.

Other fuels

Using fuels such as

- Silicone (Si) contained fuel,
- MMT (Manganese, Mn) contained

fuel,

- Ferrocene (Fe) contained fuel, and
- Other metalic additives contained

fuels, may cause vehicle and engine

damage or cause plugging, misfiring,

poor acceleration, engine stalling,

catalyst melting, abnormal corrosion,

life cycle reduction, etc.

Also, the Malfunction Indicator Lamp

(MIL) may illuminate.

NOTICE

Damage to the fuel system or per‐

formance problem caused by the

use of these fuels may not be cov‐

ered by your New Vehicle Limited

Warranty.

Use of MTBE

Kia recommends avoiding fuels contain‐

ing MTBE (Methyl Tertiary Butyl Ether)

over 15.0% vol. (Oxygen Content 2.7%

weight) in your vehicle.

Fuel containing MTBE over 15.0% vol.

(Oxygen Content 2.7% weight) may re‐

duce vehicle performance and produce

vapor lock or hard starting.

CAUTION

Your New Vehicle Limited Warranty

may not cover damage to the fuel

system and any performance prob‐

lems that are caused by the use of

fuels containing methanol or fuels

containing MTBE (Methyl Tertiary

Butyl Ether) over 15.0% vol. (Oxygen

Content 2.7% weight.)

Do not use methanol

Fuels containing methanol (wood alco‐

hol) should not be used in your vehicle.

This type of fuel can reduce vehicle

performance and damage components

of the fuel system, engine control sys‐

tem and emission control system.

Fuel Additives

Kia recommends that you use unleaded

gasoline which has an octane rating of

RON (Research Octane Number) 95 /

AKI (Anti Knock Index) 91 or higher (for

Europe) or Octane Rating of RON (Re‐

search Octane Number) 91 / AKI (Anti-

Knock Index) 87 or higher (except Eu‐

rope).

For customers who do not use good

quality gasolines including fuel additives

regularly, and have problems starting

or the engine does not run smoothly,

one bottle of additives added to the

fuel tank at every 15,000 km (For Eu‐

rope)/10,000 km (Except Europe). Addi‐

tives are available from a professional

workshop along with information on

how to use them. Kia recommends to

visit an authorized Kia dealer/service

partner.

Introduction

1-04

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CERATO 2018

Reviews:

Kia CERATO 2018, Owner'S Manual, Page: 10 / 602

Search results

Summary of Contents for CERATO 2018

Reviews: