Kia Ceed 2015 Manual Download Page 591

Page: 591 / 643

7 85

Maintenance

4. Remove the bulb-socket from the

housing by turning the socket counter
clockwise until the tabs on the socket
align with the slots on the housing.

5. Install the new bulb-socket into the

housing by aligning the tabs on the
socket with the slots in the housing.
Push the socket into the housing and
turn the socket clockwise.

6. Connect the power connector to the

socket.

Headlight and front fog light aim-
ing (for Europe)

Headlight aiming

Without AFLS

1. Inflate the tires to the specified pres-

sure and remove any loads from the
vehicle except the driver, spare tire,
and tools.

2. The vehicle should be placed on a flat

floor.

3. Draw vertical lines (Vertical lines pass-

ing through respective head lamp cen-
ters) and a horizontal line (Horizontal
line passing through center of head
lamps) on the screen.

4. With the head lamp and battery in nor-

mal condition, aim the head lamps so
the brightest portion falls on the hori-
zontal and vertical lines.

5. To aim the low beam left or right, turn

the driver (1) clockwise or counter-
clockwise. To aim the low beam up or
down, turn the driver (2) clockwise or
counterclockwise.

To aim the high beam up or down, turn

the driver (3) clockwise or counter-
clockwise.

OJD072027

■

Fog light

■

Fog light+DRL (Bulb type)

■

DRL

OJD073067/OJD073068/OJD073069

JD PE eng 7.QXP 1/28/2016 5:40 PM Page 85

Summary of Contents for Ceed 2015




































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Ceed 2015

Reviews:

Kia Ceed 2015, Manual, Page: 591 / 643

Search results

Summary of Contents for Ceed 2015

Reviews: