Kia Ceed 2015 Manual Download Page 590

Page: 590 / 643

Maintenance

Turn signal light

Follow the steps 1 to 7 from the previous
page.
8. Remove the socket from the assembly

by turning the socket counterclockwise
until the tabs on the socket align with
the slots on the assembly.

9. Remove the bulb from the socket by

pressing it in and rotating it counter-
clockwise until the tabs on the bulb
align with the slots in the socket. Pull
the bulb out of the socket.

10. Insert a new bulb by inserting it into

the socket and rotating it until it locks
into place.

11. Install the socket in the assembly by

aligning the tabs on the socket with
the slots in the assembly. Push the
socket into the assembly and turn the
socket clockwise.

Front fog light, Daytime running light
(if equipped)

1. Pull the wheel guard down by rotating

the screws.

2. Reach your hand into the back of the

front bumper.

3. Disconnect the power connector from

the socket.

OJD072044

OJD072050

JD PE eng 7.QXP 1/28/2016 5:40 PM Page 84

Summary of Contents for Ceed 2015




































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Ceed 2015

Reviews:

Kia Ceed 2015, Manual, Page: 590 / 643

Search results

Summary of Contents for Ceed 2015

Reviews: