Kia Ceed 2015 Manual Download Page 587

Page: 587 / 643

7 81

Maintenance

5. Pull out the front bumper cover.

6. Loosen the retaining bolt .
7. Pull out the headlight assembly from

the body of the vehicle.

Headlight (High, 1) and static bending
light (2, if equipped)

Follow the steps 1 to 7 from the previous
chapter.
8. Remove the cover by turning it coun-

terclockwise.

9. Disconnect the headlight bulb socket-

connector.

10. Unsnap the headlight bulb retaining

wire by depressing the end and push-
ing it upward.

11. Remove the bulb from the headlight

assembly.

12. Install a new headlight bulb and snap

the headlight bulb retaining wire into
position by aligning the wire with the
groove on the bulb.

OJD072041

OJD072056

OJD075055

OJD075062

Diesel only

JD PE eng 7.QXP 1/28/2016 5:40 PM Page 81

Summary of Contents for Ceed 2015




































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Ceed 2015

Reviews:

Kia Ceed 2015, Manual, Page: 587 / 643

Search results

Summary of Contents for Ceed 2015

Reviews: