manualshive.com logo in svg

Kia Ceed 2015, Manual, Page: 448 / 643

Share
Download
Kia Ceed 2015 Manual Download Page 448

5 75

Driving your vehicle

When the system is not used turn the
system off by pressing the switch.
When the system is turned on the warn-
ing light will illuminate for 3 seconds on
the outside rearview mirror.

Warning type

The system will activate when:
1. The system is on 
2. Vehicle speed is above 30 km/h (18.6

mph)

3. Other vehicles are detected in the rear

side

If a vehicle is detected within the bound-
ary of the system, a warning light will illu-
minate on the outside rearview mirror.
If the detected vehicle is not in detection
range, the warning will be turned off.

OJD055059

1st stage

JD PE eng 5.QXP  9/30/2015  5:27 PM  Page 75

Summary of Contents for Ceed 2015




































































































































































































































































































































































































































































































































































































































































Reviews:

No comments