manualshive.com logo in svg

Kia Ceed 2015, Manual, Page: 431 / 643

Share
Download
Kia Ceed 2015 Manual Download Page 431

Driving your vehicle

58

5

1. Cruise indicator
2. Cruise set indicator

The cruise control system allows you to
program the vehicle to maintain a con-
stant speed without pressing the acceler-
ator pedal.

This system is designed to function
above approximately 30 km/h (20 mph).

✽

✽

NOTICE

• During normal cruise control opera-

tion, when the SET switch is activated
or reactivated after applying the
brakes, the cruise control will ener-
gize after approximately 3 seconds.
This delay is normal.

• To activate cruise control, depress the

brake pedal at least once after turning
the ignition switch to the ON position
or starting the engine. This is to check
if the brake switch which is important
part to cancel cruise control is in nor-
mal condition.

CRUISE CONTROL SYSTEM (IF EQUIPPED)

WARNING  

• If the cruise control is left on,

(cruise indicator light is illuminat-
ed), the cruise control can be
switched on accidentally. Keep
the cruise control system off
when the cruise control is not in
use, to avoid inadvertently set-
ting a speed.

• Use the cruise control system

only when traveling on open
highways in good weather.

• Do not use the cruise control

when it may not be safe to keep
the vehicle at a constant speed,
for instance, driving in heavy or
varying traffic, or on slippery
(rainy, icy or snow-covered) or
winding roads or over 6% up-hill
or down-hill roads.

• Pay particular attention to the

driving conditions whenever
using the cruise control system.

• Be careful when driving downhill

using the cruise control system,
which may increase the vehicle
speed.

CAUTION

During cruise-speed driving of a
manual transaxle vehicle, do not
shift into neutral without depress-
ing the clutch pedal, since the
engine will be overrevved. If this
happens, depress the clutch pedal
or release the cruise control ON-
OFF switch.

OJD052015/OJD055048L

■

Supervision

■

Normal vision

JD PE eng 5.QXP  9/30/2015  5:25 PM  Page 58

Summary of Contents for Ceed 2015




































































































































































































































































































































































































































































































































































































































































Reviews:

No comments