manualshive.com logo in svg

Kia Ceed 2015, Manual, Page: 385 / 643

Share
Download
Kia Ceed 2015 Manual Download Page 385

Driving your vehicle

12

5

Starting the engine

✽

✽  

NOTICE - 

Kick down mecha-
nism (if equipped)

If your vehicle is equipped with a kick
down mechanism in the accelerator
pedal, it prevents you from driving at
full throttle unintentionally by making
the driver require increased effort to
depress the accelerator pedal. However,
if you depress the pedal more than
approximately 80%, the vehicle can be
at full throttle and the accelerator pedal
will be easier to depress. This is not a
malfunction but a normal condition. 

Starting the gasoline engine 

1. Carry the smart key or leave it inside

the vehicle.

2. Make sure the parking brake is firmly

applied.

3.

Manual Transaxle

- Depress the

clutch pedal fully and shift the
transaxle into Neutral. Keep the clutch
pedal and brake pedal depressed
while starting the engine.

Automatic transaxle/DCT*

- Place the

transaxle shift lever in P (Park).
Depress the brake pedal fully.
You can also start the engine when the
shift lever is in the N (Neutral) position.

* DCT : Dual clutch transmission

4. Press the engine start/stop button.
It should be started without depressing
the accelerator.
5. Do not wait for the engine to warm up

while the vehicle remains stationary.
Start driving at moderate engine
speeds. (Steep accelerating and decel-
erating should be avoided.)

Starting the diesel engine 

To start the diesel engine when the
engine is cold, it has to be pre-heated
before starting the engine and then have
to be warmed up before starting to drive.
1. Make sure the parking brake is

applied.

2.

Manual Transaxle

- Depress the

clutch pedal fully and shift the
transaxle into Neutral. Keep the clutch
pedal and brake pedal depressed
while pressing the engine start/stop
button to the START position.

Automatic Transaxle / DCT* 

- Place

the transaxle shift lever in P (Park).
Depress the brake pedal fully.
You can also start the engine when the
shift lever is in the N (Neutral) position.

WARNING

• Always wear appropriate shoes

when operating your vehicle.
Unsuitable shoes (high heels, ski
boots,etc.) may interfere with
your ability to use the brake and
accelerator pedal.

• Do not start the vehicle with the

accelerator pedal depressed. The
vehicle can move and lead to an
accident.

• Wait until the engine rpm is normal.

The vehicle may suddenly move if
the brake padel is released when
the rpm is high.

JD PE eng 5.QXP  9/30/2015  5:23 PM  Page 12

Summary of Contents for Ceed 2015




































































































































































































































































































































































































































































































































































































































































Reviews:

No comments