manualshive.com logo in svg

Kia Ceed 2015, Manual, Page: 251 / 643

Share
Download
Kia Ceed 2015 Manual Download Page 251

Features of your vehicle

168

4

OJD042140

OJD042154

■

Front
• Type A

• Type B

OJD042155

OJD042243

■

Rear (if equipped)
• Type A

• Type B

Power outlet

The power outlet is designed to provide power for mobile telephones or other
devices designed to operate with vehicle electrical systems. The devices should
draw less than 10 amps with the engine running.

CAUTION

• Use power outlet only when the

engine is running and remove the
accessory plug after use. Using
the accessory plug for prolonged
periods of time with the engine
off could cause the battery to dis-
charge.

• Do not use an electric accessory

or equipment the power con-
sumption of which is greater than
12V (10A). It may cause damage
to the power outlet or vehicle
wiring harness.

• Only use 12V electric accessories

which are less than 10A in elec-
tric capacity.

• Adjust the air-conditioner or

heater to the lowest operating
level when using the power outlet.

• Close the cover when not in use.
• Some electronic devices can

cause electronic interference
when plugged into a vehicle’s
power outlet. These devices may
cause excessive audio static and
malfunctions in other electronic
systems or devices used in your
vehicle.

(Continued)

JD PE eng 4.QXP  1/28/2016  5:26 PM  Page 168

Summary of Contents for Ceed 2015




































































































































































































































































































































































































































































































































































































































































Reviews:

No comments