Kia Ceed 2015 Manual Download Page 22

Page: 22 / 643

3 5

Safety features of your vehicle

Seatback angle

Turn the control knob forward or rearward
to move the seatback to the desired
angle.

Seat cushion height (if equipped)

To change the height of the seat cushion,
push the lever upwards or downwards.
• To lower the seat cushion, push down

the lever several times.

• To raise the seat cushion, pull up the

lever several times.

Lumbar support (if equipped)

The lumbar support can be adjusted by
pressing the lumbar support switch on
the side of the seat.
1. Press the front portion of the switch to

increase support, or the rear portion of
the switch, to decrease support.

2. Release the switch once it reaches the

desired position.

OJD032003

OJD032004

OJD032055

JD PE eng 3.QXP 9/9/2015 4:13 PM Page 5

Summary of Contents for Ceed 2015




































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Ceed 2015

Reviews:

Kia Ceed 2015, Manual, Page: 22 / 643

Search results

Summary of Contents for Ceed 2015

Reviews: