Home
/
Kia
/
Ceed 2015
/
Manual

Kia Ceed 2015, Manual, Page: 119 / 643

Share

Page: 119 / 643

Kia Ceed 2015 Manual Download Page 119

Features of your vehicle

36

4

Resetting the sunroof

Whenever the vehicle battery is discon-
nected or discharged, or related fuse is
blown, you must reset your sunroof sys-
tem as follows:
1. Turn the engine on and close the sun-

roof glass and sunshade completely.

2. Release the control lever.
3. Push the sunroof control lever forward in

the direction of close (about 10 seconds)
until the sunroof operates as follows;

SUNSHADE OPEN

→

TILT OPEN

Then, release the control lever.

4. Push the sunroof control lever forward

in the direction of close until the sun-
roof operates as follows;

SUNSHADE & SLIDE OPEN SIMUL-
TANEOUSLY

→

SLIDE CLOSE

→

SUNSHADE CLOSE

Then, release the control lever.

When this is complete, the sunroof
system is reset.

For more detailed information, we recom-
mend that you contact an authorized Kia
dealer.

✽

✽

NOTICE

If you do not reset the sunroof, it may
not work properly.

CAUTION

• Periodically remove any dirt that

may accumulate on the guide rail.

• If you try to open the sunroof when

the temperature is below freezing
or when the sunroof is covered
with snow or ice, the glass or the
motor could be damaged.

• If you drive with the sunroof opened

right after a car wash or rain, water
may get inside the vehicle.

JD PE eng 4.QXP 1/28/2016 5:14 PM Page 36

«
...
117
118
119
120
121
...
»

Summary of Contents for Ceed 2015




































































































































































































































































































































































































































































































































































































































































Reviews:

No comments