manualshive.com logo in svg

Kia Ceed 2006, Owner'S Manual, Page: 91 / 349

Share
Download
Kia Ceed 2006 Owner'S Manual Download Page 91

3 81

Knowing your vehicle

✽

✽

NOTICE

If the fuel filler lid will not open in

cold weather because the area

around it is frozen, push or lightly

tap the lid.

(Continued)
• Do not light any fire around a

gas station. DO NOT use
matches or a lighter and DO
NOT SMOKE or leave a lit cig-
arette in your vehicle whilst at
a gas station especially during
refueling. Automotive fuel is
highly flammable and can,
when ignited, result in explo-
sion by flames.

• If a fire breaks out during refu-

eling, leave the vicinity of the
vehicle, and immediately con-
tact the manager of the gas
station or contact the police
and local fire department.
Follow any safety instructions
they provide.

CAUTION

• Make sure to refuel with petrol

only for the petrol engine vehi-
cles and diesel fuel only for
the diesel engine vehicles.

• Check to make sure the fuel

filler cap is securely closed
after refueling.

• If the fuel filler cap requires

replacement, use only a gen-
uine Kia cap or the equivalent
specified for your vehicle. An
incorrect fuel filler cap can
result in a serious malfunction
of the fuel system or emission
control system.

Correct

replacement caps are avail-
able at authorised Kia dealers.

• Do not spill fuel on the exteri-

or surfaces of the vehicle. Any
type of fuel spilled on painted
surfaces may damage the
paint.

Summary of Contents for Ceed 2006






























































































































































































































































































































































Reviews:

No comments