manualshive.com logo in svg

Kia Ceed 2006, Owner'S Manual, Page: 65 / 349

Share
Download
Kia Ceed 2006 Owner'S Manual Download Page 65

3 55

Knowing your vehicle

What your air bag system
does

Driver’s air bag and front passen-
ger’s air bag are designed to supple-
ment  the protection offered by the
seat belt in certain frontal collisions.
Likewise, side air bag and curtain air
bags are designed to supplement
the protection offered by the seat belt
in side collisions. seat belts are
designed to reduce the injury of the
driver or passengers in case of light
impact or collision. However, to help
reduce impact on driver or passen-
gers in a serious collision, seat belts
must also be correctly worn.

What your air bag system
does not do

The air bag system is designed to
supplement the protection offered by
the seat belt system. IT IS NOT A
SUBSTITUTE FOR THE SEAT
BELT.

The importance of using 
seat belts

There are four very important rea-
sons to use seat belts even with an
air bag supplemental restraint sys-
tem. They:
• help keep you in the proper posi-

tion (away from the air bag) when it
inflates.

• reduce the risk of harm in rollover,

or rear impact collisions, because
an air bag is not designed to inflate
in such situations and even a side
curtain air bag is designed to
inflate only in certain side impact
collisions.

• reduce the risk of harm in frontal or

side collisions which are not
severe enough to actuate the air
bag supplemental restraint system.

• reduce the risk of being thrown

from your vehicle.

Summary of Contents for Ceed 2006






























































































































































































































































































































































Reviews:

No comments