manualshive.com logo in svg

Kia Ceed 2006, Owner'S Manual, Page: 340 / 349

Share
Download
Kia Ceed 2006 Owner'S Manual Download Page 340

Maintenance

66

7

INTERIOR CARE 

Interior general precautions 

Prevent caustic solutions such as
perfume and cosmetic oil from con-
tacting the dashboard and door trim
because they may cause damage or
discoloration. If they do contact the
dashboard, wipe them off immedi-
ately. See the instructions that follow
for the proper way to clean vinyl.

Cleaning the upholstery and
interior trim 

Vinyl 

Remove dust and loose dirt from
vinyl with a whisk broom or vacuum
cleaner. Clean vinyl surfaces with a
vinyl cleaner.

Fabric 

Remove dust and loose dirt from fab-
ric with a whisk broom or vacuum
cleaner. Clean with a mild soap solu-
tion recommended for upholstery or
carpets. Remove fresh spots imme-
diately with a fabric spot cleaner. If
fresh spots do not receive immediate
attention, the fabric can be stained
and its colour can be affected. Also,
its fire-resistant properties can be
reduced if the material is not proper-
ly maintained.

Cleaning the lap/shoulder belt
webbing  

Clean the belt webbing with any mild
soap solution recommended for
cleaning upholstery or carpet. Follow
the instructions provided with the
soap. Do not bleach or re-dye the
webbing because this may weaken
it.

Cleaning the interior window
glass 

If the interior glass surfaces of the
vehicle become fogged (that is, cov-
ered with an oily, greasy or waxy
film), they should be cleaned with
glass cleaner. Follow the directions
on the glass cleaner container.

CAUTION

Using anything but recommend-
ed cleaners and procedures
may affect the fabric’s appear-
ance and fire-resistant proper-
ties.

CAUTION

If wax for synthetic leather con-
tacts the dashboard and door
trim, it may cause stain and blot.

CAUTION

Do not scrape or scratch the
inside of the rear window. This
may result in damage to the rear
window defroster grid.

Summary of Contents for Ceed 2006






























































































































































































































































































































































Reviews:

No comments