Kia Ceed 2006 Owner'S Manual Download Page 335

Page: 335 / 349

7 61

Maintenance

Side repeater light bulb
replacement (if equipped)

1. Remove the light assembly from

the vehicle by pushing the lens for-
ward and pulling the assembly out.

2. Disconnect the bulb electrical con-

nector.

3. Separate the socket and the lens

parts by turning the socket count-
er clockwise until the tabs on the
socket align with the slots on the
lens part.

4. Remove the bulb by pulling it

straight out.

5. Insert a new bulb in the socket.
6. Reassemble the socket and the

lens part.

7. Connect the bulb electrical con-

nector.

8. Reinstall the light assembly to the

body of the vehicle.

OHD076036

Summary of Contents for Ceed 2006






























































































































































































































































































































































Search results

Summary of Contents for Ceed 2006

Reviews:

Kia Ceed 2006, Owner'S Manual, Page: 335 / 349

Search results

Summary of Contents for Ceed 2006

Reviews: