manualshive.com logo in svg

Kia Ceed 2006, Owner'S Manual, Page: 33 / 349

Share
Download
Kia Ceed 2006 Owner'S Manual Download Page 33

3 23

Knowing your vehicle

Adjusting the seatback recliner

To recline the seatback, rotate the
knob forward or rearward to the
desired angle.

Lumbar support (if equipped) 

You can adjust the lumbar support by
moving the lever on the side of seat-
back.
Pivoting the lever toward the front of
the vehicle increases the lumbar
support.
Pivoting the lever toward the rear of
the vehicle decreases the lumbar
support.

OED036017R

OED036018R

WARNING

Driving or riding in a vehicle
with a front seatback reclined
could lead to serious or fatal
injury in an accident. If a front
seat is reclined during an acci-
dent, the occupant’s hips may
slide under the lap portion of
the seat belt applying great
force to the unprotected
abdomen or neck. Serious or
fatal internal injuries could
result. Keep the seatbacks in a
comfortably upright position
whenever the vehicle is in
motion.

Summary of Contents for Ceed 2006






























































































































































































































































































































































Reviews:

No comments