manualshive.com logo in svg

Kia Ceed 2006, Owner'S Manual, Page: 254 / 349

Share
Download
Kia Ceed 2006 Owner'S Manual Download Page 254

6 11

In case of an emergency

Memory fuse

Your vehicle is equipped with a mem-
ory fuse to prevent battery discharge
if your vehicle is parked without
being operated for prolonged peri-
ods. Use the following procedures
before parking the vehicle for pro-
longed period.

1. Turn off the engine.
2. Turn off the headlights and tail

lights.

3. Open the inner fuse panel cover

and pull up the memory fuse
(ROOM LP 15A).

✽

✽

NOTICE

• If the memory fuse is pulled up

from the fuse panel, the warning

chime, audio, clock and interior

lamps, etc., will not operate. Some

items must be reset after replace-

ment.

• Even though the memory fuse is

pulled up, the battery can still be

discharged by operation of the

headlights or other electrical

devices.

OED066010R

Memory fuse

Summary of Contents for Ceed 2006






























































































































































































































































































































































Reviews:

No comments