manualshive.com logo in svg

Kia Ceed 2006, Owner'S Manual, Page: 240 / 349

Share
Download
Kia Ceed 2006 Owner'S Manual Download Page 240

5 25

Driving tips

VEHICLE  WEIGHT

This section will guide you in the
proper loading of your vehicle and/or
trailer, to keep your loaded vehicle
weight within its design rating capa-
bility, with or without a trailer.
Properly loading your vehicle will
provide maximum return of the vehi-
cle design performance. Before load-
ing your vehicle, familiarize yourself
with the following terms for determin-
ing your vehicle's weight ratings, with
or without a trailer, from the vehicle's
specifications and the certification
label:

Base curb weight 

This is the weight of the vehicle
including a full tank of fuel and all
standard equipment. It does not
include passengers, cargo, or option-
al equipment.

Vehicle curb weight

This is the weight of your new vehicle
when you picked it up from your
dealer plus any aftermarket equip-
ment.

Cargo weight

This figure includes all weight added
to the Base Curb Weight, including
cargo and optional equipment.

GAW (Gross axle weight)

This is the total weight placed on
each axle (front and rear) - including
vehicle curb weight and all payload.

GAWR (Gross axle weight rat-
ing)

This is the maximum allowable
weight that can be carried by a single
axle (front or rear). These numbers
are shown on the certification label.
The total load on each axle must
never exceed its GAWR.

Summary of Contents for Ceed 2006






























































































































































































































































































































































Reviews:

No comments