manualshive.com logo in svg

Kia Ceed 2006, Owner'S Manual, Page: 232 / 349

Share
Download
Kia Ceed 2006 Owner'S Manual Download Page 232

5 17

Driving tips

Your vehicle can tow a trailer. To
identify what the vehicle trailering
capacity is for your vehicle, you
should read the information in
“Weight of the Trailer” that appears
later in this section.
Remember that trailering is different
than just driving your vehicle by itself.
Trailering means changes in han-
dling, durability, and fuel economy.
Successful, safe trailering requires
correct equipment, and it has to be
used properly.
This section contains many time-
tested, important trailering tips and
safety rules. Many of these are
important for your safety and that of
your passengers. Please read this
section carefully before you pull a
trailer.

OED056900

Summary of Contents for Ceed 2006






























































































































































































































































































































































Reviews:

No comments