manualshive.com logo in svg

Kia Ceed 2006, Owner'S Manual, Page: 22 / 349

Share
Download
Kia Ceed 2006 Owner'S Manual Download Page 22

Knowing your vehicle

12

3

Rear hatch

Opening the rear hatch

• You can lock/unlock the latch (but

not release it) with the central door
lock system.

• If unlocked, the rear hatch can be

opened by pressing the handle (1)
and pulling the hatch up.

WARNING

- Rear door

locks

If children accidentally open the
rear doors whilst the vehicle is
in motion, they could fall out
and be severely injured or
killed. To prevent children from
opening the rear doors from the
inside, the rear door safety
locks should be used whenever
children are in the vehicle.

OED036010

CAUTION

Do not put any heavy object on
the covering shelf. It may dam-
age the covering shelf.

WARNING 

• Do not put any object on the

covering shelf. If the vehicle
suddenly stops or makes a
curve, the object may injure
passengers.

• Watch out for the edge of the

covering shelf, when you are
using the luggage room. You
may injure yourself.

Summary of Contents for Ceed 2006






























































































































































































































































































































































Reviews:

No comments