manualshive.com logo in svg

Kia Ceed 2006, Owner'S Manual, Page: 217 / 349

Share
Download
Kia Ceed 2006 Owner'S Manual Download Page 217

Driving tips

2

5

FUEL REQUIREMENTS

Petrol engine (unleaded)

For the optimal vehicle performance,
we recommend you to use unleaded
petrol with an octane rating of RON
(Research Octane Number) 95 /AKI
(Anti Knock Index) 91 or higher.
You may use unleaded petrol with an
octane rating of RON 91~94/AKI
87~90 but it may result in slight per-
formance reduction of the vehicle.

Your new Kia is designed to obtain
maximum performance with
UNLEADED FUEL, as well as mini-
mize exhaust emissions and spark
plug fouling.

✽

✽

NOTICE

NEVER USE LEADED FUEL. The

use of leaded fuel is detrimental to

the catalytic converter and will

damage the engine control system’s

oxygen sensor and affect emission

control.

Never add any fuel system cleaning

agents to the fuel tank other than

what Kia has specified. (Consult an

Authorised Kia Dealer for details.)

Petrol engine (Leaded)

In countries using LEADED FUEL,
your new Kia vehicle must use
LEADED FUEL.Your new Kia Vehicle
is designed to correspond to LEAD-
ED FUEL specifically. Please check
your vehicle whether your vehicle
can use LEADED FUEL or not.

Petrol containing alcohol and
methanol

Gasohol, a mixture of petrol and
ethanol (also known as grain alco-
hol), and petrol or gasohol containing
methanol (also known as wood alco-
hol) are being marketed along with or
instead of leaded or unleaded petrol.
Do not use gasohol containing more
than 10% ethanol, and do not use
petrol or gasohol containing any
methanol. Either of these fuels may
cause drivability problems and dam-
age to the fuel system.
Discontinue using gasohol of any
kind if drivability problems occur.

Summary of Contents for Ceed 2006






























































































































































































































































































































































Reviews:

No comments