manualshive.com logo in svg

Kia Ceed 2006, Owner'S Manual, Page: 215 / 349

Share
Download
Kia Ceed 2006 Owner'S Manual Download Page 215

4 87

Driving your vehicle

Defogging logic

Manual climate control system

To reduce the probability of fogging
up the inside of the windscreen, the
air intake control is set to the outside
(fresh) air position automatically if
any of following occur.
• The mode is selected to the 

or

whilst the system is activated.

• The ignition switch is turned on

whilst the mode is selected to the

or .

In this case, the air conditioning will
automatically operate if the mode is
selected to the 

.

If you don’t want the air-conditioning
or outside (fresh) air position, press
the corresponding button to cancel
the operation.

How to cancel or return defogging

logic of manual climate control system

1. Turn the ignition switch to the “ON”

position.

2. Turn the mode selection knob to

the defrost position (

).

3. Push the air intake control button

(

) at least 5 times within 3 sec-

onds.

Then the indicator light in the air
intake control button will blink 3 times
with 0.5 second of interval. It indicates
that the defogging logic is canceled or
returned to the programmed status.
If the battery has been discharged or
disconnected, it is reset as the defog
logic status.

Automatic climate control system

To reduce the probability of fogging
up inside of the windscreen, the air
intake control is set to outside (fresh)
air position automatically if any of fol-
lowing occur.
• The ignition switch is turned on.
• The OFF button is pushed.
• The mode is selected to the 

position.

In this case, the air conditioning will
automatically operate if the mode is
selected to the 

.

If you select the 

mode, you will

not be able to cancel the A/C system
operation or change the outside
(fresh) air position.

OED046068

Summary of Contents for Ceed 2006






























































































































































































































































































































































Reviews:

No comments