manualshive.com logo in svg

Kia Ceed 2006, Owner'S Manual, Page: 209 / 349

Share
Download
Kia Ceed 2006 Owner'S Manual Download Page 209

4 81

Driving your vehicle

Instrument panel vents

The outlet vents (B, D) can be
opened or closed separately using
the horizontal thumbwheel. To close
the vent, rotate it left to the maximum
position. To open the vent, rotate it
right to the desired position.
Also, you can adjust the direction of
air delivery from these vents using
the vent control lever as shown.

Air conditioning button 

Push the A/C button to turn the air
conditioning system on (indicator
light will illuminate).
Push the button again to turn the air
conditioning system off.

OFF button

Push the OFF button to turn off the
air climate control system. However
you can still operate the mode and
air intake buttons as long as the  igni-
tion switch is ON.

OED046061

OED046063

OED046051R

Summary of Contents for Ceed 2006






























































































































































































































































































































































Reviews:

No comments