manualshive.com logo in svg

Kia Ceed 2006, Owner'S Manual, Page: 204 / 349

Share
Download
Kia Ceed 2006 Owner'S Manual Download Page 204

Driving your vehicle

76

4

Fan speed control knob

The fan speed can be set to the
desired speed by turning the fan
speed control knob.
The higher the fan speed is, the
more air is delivered.
Pressing the OFF button turns off the
fan.

Air intake control button  

This is used to select outside (fresh)
air position or recirculated air posi-
tion.
To change the air intake control posi-
tion, push the control button.
Each time you push the button,
intake air position is changed as fol-
lows:

Recirculated air position

The indicator light on the
button is illuminated when
the recirculated air posi-
tion is selected.
With the recirculated air
position selected, air from
passenger compartment
will be drawn through the
heating system and heat-
ed or cooled according to
the function selected.

OED046058

Recirculated air position

Outside (fresh) air position

AQS mode (if equipped)

OED046057

Summary of Contents for Ceed 2006






























































































































































































































































































































































Reviews:

No comments