manualshive.com logo in svg

Kia Ceed 2006, Owner'S Manual, Page: 203 / 349

Share
Download
Kia Ceed 2006 Owner'S Manual Download Page 203

4 75

Driving your vehicle

Manual operation  

The heating and cooling system can
be controlled manually as well by
pushing buttons other than the AUTO
button. In this case, the system
works sequentially according to the
order of buttons selected.
When pressing any button except
AUTO button whilst automatic opera-
tion, the functions of the buttons not
selected will be controlled automati-
cally.
Press the AUTO button in order to
convert to full automatic control of
the system.

Temperature control knob

The temperature will increase to the
maximum HI by turning the knob to
the right extremely.
The temperature will decrease to the
minimum Lo by turning the knob to the
left extremely.
When turning the knob, the tempera-
ture will increase or decrease by
0.5°C/1°F. When set to the lowest tem-
perature setting, the air conditioning
will operate continuously.

Temperature conversion

If the battery has been discharged or
disconnected, the temperature mode
will reset as Centigrade degree.
This is  normal condition and you can
switch the temperature mode
between Centigrade to Fahrenheit as
follows;
Whilst depressing the OFF button,
depress the AUTO button for 3 sec-
onds or more. The display will
change from Centigrade to
Fahrenheit, or from Fahrenheit to
Centigrade.

OED046056

Summary of Contents for Ceed 2006






























































































































































































































































































































































Reviews:

No comments