manualshive.com logo in svg

Kia Ceed 2006, Owner'S Manual, Page: 202 / 349

Share
Download
Kia Ceed 2006 Owner'S Manual Download Page 202

Driving your vehicle

74

4

Automatic operation

The automatic climate control sys-
tem  is controlled by simply setting
the desired temperature.
The Full Automatic Temperature
Control (FATC) system automatically
controls the heating and cooling sys-
tem as follows;

1. Push the AUTO button. It is indi-

cated by AUTO on the display. The
modes, fan speeds, air intake and
air-conditioning will be controlled
automatically by temperature set-
ting.

2. Turn the TEMP knob to set the

desired temperature.

If the temperature is set to the
lowest setting Lo, the air condi-
tioning  system will operate con-
tinuously.

3. To turn the automatic operation

off, press any button except tem-
perature control button and AQS
button. If you press the mode
selection button, air-conditioning
button, defrost button, air intake
control button or fan speed button,
the selected function will be con-
trolled manually whilst other func-
tions operate automatically.

Regardless of the temperature set-
ting, when using automatic opera-
tion, the air conditioning system will
automatically turn on to decrease the
humidity inside the vehicle, even if
the temperature is set to warm.

✽

✽

NOTICE

Never place anything over the sen-

sor located on the instrument panel

to ensure better control of the heat-

ing and cooling system.  

OED046055

OED046078R

Summary of Contents for Ceed 2006






























































































































































































































































































































































Reviews:

No comments