manualshive.com logo in svg

Kia Ceed 2006, Owner'S Manual, Page: 2 / 349

Share
Download
Kia Ceed 2006 Owner'S Manual Download Page 2

i

Thank you for choosing a Kia vehicle.
When you require service, remember that your dealer

knows your vehicle best. Your dealer has factory-trained

technicians, recommended special tools, genuine Kia

replacement parts and is dedicated to your complete sat-

isfaction.
Because subsequent owners require this important infor-

mation as well, this publication should remain with the

vehicle if it is sold.
This manual will familiarize you with operational, main-

tenance and safety information about your new vehicle. It

is supplemented by a Warranty and Maintenance book

that provides important information on all warranties

regarding your vehicle. We urge you to read these publi-

cations carefully and follow the recommendations to help

assure enjoyable and safe operation of your new vehicle.
Kia offers a great variety of options, components and fea-

tures for its various models.
Therefore, the equipment described in this manual, along

with the various illustrations, may not all be applicable to

your particular vehicle. 

The information and specifications provided in this man-

ual were accurate at the time of printing. Kia reserves the

right to discontinue or change specifications or design at

any time without notice and without incurring any obli-

gation. If you have questions, always check with your

Kia Dealer.
We assure you of our continuing interest in your motor-

ing pleasure and satisfaction in your Kia vehicle.

© 2006 Kia Motors.
All rights reserved. Reproduction by any means, elec-

tronic or mechanical, including photocopying, recording,

or by any information storage and retrieval system or

translation in whole or part is not permitted without writ-

ten authorization from Kia Motors.

Foreword

Summary of Contents for Ceed 2006






























































































































































































































































































































































Reviews:

No comments