manualshive.com logo in svg

Kia Ceed 2006, Owner'S Manual, Page: 198 / 349

Share
Download
Kia Ceed 2006 Owner'S Manual Download Page 198

Driving your vehicle

70

4

System operation

Ventilation

1. Set the mode to the 

position.

2. Set the air intake control to the

outside (fresh) air position.

3. Set the temperature control to the

desired position.

4. Set the fan speed control to the

desired speed.

Heating

1. Set the mode to the 

position.

2. Set the air intake control to the

outside (fresh) air position.

3. Set the temperature control to the

desired position.

4. Set the fan speed control to the

desired speed.

5. If dehumidified heating is desired,

turn the air conditioning system (if
equipped) on.

• If the windscreen fogs up, set the

mode to the 

,

position.

Air conditioning (if equipped) 

All Kia Air Conditioning Systems are
filled with environmentally friendly 
R-134a refrigerant which is not dam-
aging to the ozone layer.
1. Start the engine. Push the air con-

ditioning button.

2. Set the mode to the 

position.

3. Set the air intake control to the

outside air or recirculated air posi-
tion.

4. Adjust the fan speed control and

temperature control to maintain
maximum comfort.

• When maximum cooling is desired,

set the temperature control to the
extreme left position, set the air
intake control to the recirculated air
position, then set the fan speed
control to the highest speed.

Summary of Contents for Ceed 2006






























































































































































































































































































































































Reviews:

No comments