manualshive.com logo in svg

Kia Ceed 2006, Owner'S Manual, Page: 195 / 349

Share
Download
Kia Ceed 2006 Owner'S Manual Download Page 195

4 67

Driving your vehicle

Face position 

Air flow is directed toward
the upper body and face.
Additionally, each outlet
can be controlled to direct
the air discharged from
the outlet.
(outlet port: B, D)

Face - floor position 

Air flow is directed
towards the face and the
floor. The air to the floor is
warmer than the air to the
face (except when the
temperature control is set
to the extreme cold posi-
tion).
(outlet port: B, D, C, E)

Floor position 

Most of the air flow is
directed to the floor, with a
small amount of the air
being directed to the wind-
screen and side window
defroster.
(outlet port: C, E, A, D)

Floor - defrost position 

Most of the air flow is
directed to the floor and
the windscreen with a
small amount directed to
the side window
defrosters.
(outlet port: A, C, E, D)

Defrost position 

Most of the air flow is
directed to the windscreen
with a small amount of air
directed to the side win-
dow defrosters.
(outlet port: A, D)

Instrument panel vents

The outlet vents (B, D) can be
opened or closed separately using
the horizontal thumbwheel. To close
the vent, rotate it left to the maximum
position. To open the vent, rotate it
right to the desired position.
Also, you can adjust the direction of
air delivery from these vents using
the vent control lever as shown.

OED046051R

Summary of Contents for Ceed 2006






























































































































































































































































































































































Reviews:

No comments