manualshive.com logo in svg

Kia Ceed 2006, Owner'S Manual, Page: 182 / 349

Share
Download
Kia Ceed 2006 Owner'S Manual Download Page 182

Driving your vehicle

54

4

Parking light position (

)

When the light switch is in the park-
ing light position (1st position), the
tail, position, license and instrument
panel lights are ON.

Headlight position (

)

When the light switch is in the head-
light position (2nd position) the head,
tail, position, license and instrument
panel lights are ON.

✽

✽

NOTICE

The ignition switch must be in the

ON position to turn on the head-

lights.

Auto light position (if equipped)

When the light switch is in the AUTO
light position, the taillights and head-
lights will be turned ON or OFF auto-
matically depending on the amount
of light outside the vehicle.

OED046028R

OED046029R

OED046030R

Summary of Contents for Ceed 2006






























































































































































































































































































































































Reviews:

No comments