manualshive.com logo in svg

Kia Ceed 2006, Owner'S Manual, Page: 174 / 349

Share
Download
Kia Ceed 2006 Owner'S Manual Download Page 174

Driving your vehicle

46

4

To change the average fuel con-
sumption display unit (

l

/100km 

↔

MPG), press the UP(

▲

) button for

more than 3 seconds.
The display ranges from 0.0 to 99.9 

l

/100 km (MPG).

Instantaneous Fuel
Consumption 

This mode calculates the instanta-
neous fuel consumption from the
instantaneous fuel used and the dis-
tance starting from ignition on. The
instantaneous fuel consumption is
calculated from the fuel consumption
input. The display is updated every
second.
To reset the instantaneous fuel con-
sumption, press the RESET button
for more than 1 second, when the
instantaneous fuel consumption is
displayed.

To change the instantaneous fuel
consumption display unit (

l

/100km

↔

MPG), press the UP(

▲

) button for

more than 3 seconds.
The display ranges from 0.0 to 99.9 

l

/100 km (0.0 to 99.9 MPG).
When you drive less than 30 km/h, 
“--” symbol will be displayed.

OED046025

Summary of Contents for Ceed 2006






























































































































































































































































































































































Reviews:

No comments