manualshive.com logo in svg

Kia Ceed 2006, Owner'S Manual, Page: 168 / 349

Share
Download
Kia Ceed 2006 Owner'S Manual Download Page 168

Driving your vehicle

40

4

Air bag warning 
(if equipped) 

This warning light will blink or illumi-
nate for approximately 6 seconds
each time you turn the ignition switch
to the ON  position.
If this indicator does not go out, or if
it illuminates whilst the vehicle is
being driven, see an authorised Kia
Dealer for immediate service.

Front passenger’s air
bag OFF indicator 
(if equipped)

The front passenger’s air bag OFF
indicator illuminates for about 4 sec-
onds after the ignition switch is
turned to the  ON position.
The front passenger’s air bag OFF
indicator also comes on when the
front passenger’s air bag ON/OFF
switch is set to OFF position and
turns off when the front passenger’s
air bag ON/OFF switch is set to ON
position.

AIR 

BAG

CAUTION

If there is a malfunction of the
front passenger’s air bag
ON/OFF switch, the front pas-
senger’s air bag OFF indicator
will not illuminate and the front
passenger’s air bag will inflate
in frontal impact crashes even if
the front passenger’s air bag
ON/OFF switch is set to OFF
position.
If this occurs, have an autho-
rised KIA dealer inspect the
passenger’s  front air bag
ON/OFF switch and the SRS air
bag system as soon as possi-
ble.

Summary of Contents for Ceed 2006






























































































































































































































































































































































Reviews:

No comments