manualshive.com logo in svg

Kia Ceed 2006, Owner'S Manual, Page: 165 / 349

Share
Download
Kia Ceed 2006 Owner'S Manual Download Page 165

4 37

Driving your vehicle

Immobiliser indicator 
(if equipped)

This light illuminates when the immo-
biliser key is inserted and turned to
the ON position to start the engine.
If this light turns off or blinks when
the ignition switch is in the ON posi-
tion before starting the engine, have
the system checked by an authorised
Kia Dealer.

Parking brake & brake
fluid warning 

Parking brake warning 

This light is illuminated when the
parking brake is applied with the igni-
tion switch in the START or ON posi-
tion. The warning light should go off
when the parking brake is released.

Low brake fluid level warning

If the warning light remains on, it may
indicate that the brake fluid level in
the reservoir is low.
If the warning light remains on:
1. Drive carefully to the nearest safe

location and stop your vehicle.

2. With the engine stopped, check

the brake fluid level immediately
and add fluid as required. Then
check all brake components for
fluid leaks.

3. Do not drive the vehicle if leaks

are found, the warning light
remains on or the brakes do not
operate properly. Have it towed to
any Authorised Kia Dealer for a
brake system inspection and nec-
essary repairs.

To check bulb operation, check
whether the parking brake and brake
fluid warning light illuminates when
the ignition switch is in the ON posi-
tion.

WARNING

Driving the vehicle with a warn-
ing light on is dangerous. If the
brake warning light remains on,
have the brakes checked and
repaired immediately by an
authorised Kia Dealer.

Summary of Contents for Ceed 2006






























































































































































































































































































































































Reviews:

No comments