manualshive.com logo in svg

Kia Ceed 2006, Owner'S Manual, Page: 162 / 349

Share
Download
Kia Ceed 2006 Owner'S Manual Download Page 162

Driving your vehicle

34

4

Fuel gauge

The fuel gauge indicates the approx-
imate amount of fuel remaining in the
fuel tank. The fuel tank capacity is
given in chapter 8. The fuel gauge is
supplemented by a low fuel warning
light, which will illuminate when the
fuel tank is near empty.
On inclines or curves, the fuel gauge
pointer may fluctuate or the low fuel
warning light may come on earlier
than usual due to the movement of
fuel in the tank.

Instrument panel illumination
(if equipped)

When the vehicle’s parking lights or
headlights are on, rotate the illumina-
tion control knob to adjust the instru-
ment panel illumination intensity.

WARNING - 

Fuel gauge

Running out of fuel can expose
vehicle occupants to danger.
You must stop and obtain addi-
tional fuel as soon as possible
after the warning light comes on
or when the gauge indicator
comes close to the ‘0’ level.

OED046026R

Summary of Contents for Ceed 2006






























































































































































































































































































































































Reviews:

No comments