manualshive.com logo in svg

Kia Ceed 2006, Owner'S Manual, Page: 161 / 349

Share
Download
Kia Ceed 2006 Owner'S Manual Download Page 161

4 33

Driving your vehicle

Speedometer  

The speedometer indicates the for-
ward speed of the vehicle.

Odometer/Tripmeter

You can choose the odometer, trip-
meter A and tripmeter B by pressing
the tripmeter mode button.

Odometer

The odometer indicates the total dis-
tance the vehicle has been driven.

Tripmeter

TRIP A: Tripmeter A
TRIP B: Tripmeter B
The tripmeter indicates the distance
of individual trips selected by the
driver. Tripmeter A and B can be
reset to 0 by pressing the reset but-
ton for 1 second or more, and then
releasing.

Tachometer   

The tachometer indicates the
approximate number of engine revo-
lutions per minute (rpm).
Use the tachometer to select the cor-
rect shift points and to prevent lug-
ging and/or over-revving the engine.
The tachometer pointer may move
slightly when the ignition switch is in
ACC or ON position with the engine
OFF. This movement is normal and
will not affect the accuracy of the
tachometer once the engine is run-
ning.

✽

✽  

NOTICE

Do not operate the engine within the

tachometer's RED ZONE.

This may cause severe engine dam-

age.  

Engine temperature gauge  

This gauge shows the temperature
of the engine coolant when the igni-
tion switch is ON.
Do not continue driving with an over-
heated engine. If your vehicle over-
heats, refer to “Overheating” in the
Index.

✽

✽  

NOTICE

If the gauge pointer moves beyond

the normal range area toward the

“130” position, it indicates overheat-

ing that may damage the engine.

GAUGES

Summary of Contents for Ceed 2006






























































































































































































































































































































































Reviews:

No comments