manualshive.com logo in svg

Kia Ceed 2006, Owner'S Manual, Page: 159 / 349

Share
Download
Kia Ceed 2006 Owner'S Manual Download Page 159

4 31

Driving your vehicle

ESP OFF usage

When driving

• It’s a good idea to keep the ESP

turned on for daily driving whenev-
er possible.

• To turn ESP off whilst driving,

press the ESP OFF button whilst
driving on a flat road surface.

Never press ESP OFF button whilst
ESP is operating (ESP indicator light
blinks).
If ESP is turned off whilst ESP is
operating, the vehicle may slip out of
control.

✽

✽

NOTICE

• When operating the vehicle on a

dynamometer, ensure that the ESP

is turned off (ESP OFF light illu-

minated). If the ESP is left on, it

may prevent the vehicle speed

from increasing, and result in false

diagnosis.

• Turning the ESP off does not

affect ABS or brake system opera-

tion.  

WARNING 

Never press the ESP OFF button
whilst ESP is operating.
If the ESP is turned off whilst
ESP is operating, the vehicle
may go out of control.
To turn ESP off whilst driving,
press the ESP OFF button whilst
driving on a flat road surface.

Summary of Contents for Ceed 2006






























































































































































































































































































































































Reviews:

No comments