manualshive.com logo in svg

Kia Ceed 2006, Owner'S Manual, Page: 152 / 349

Share
Download
Kia Ceed 2006 Owner'S Manual Download Page 152

Driving your vehicle

24

4

The cruise control system allows you
to program the vehicle to maintain a
constant speed without resting your
foot on the accelerator pedal.
This system is designed to function
above approximately 40 km/h (24
mph).

To set cruise control speed:

1. Push the CRUISE ON/OFF button

on the steering wheel, to turn the
system on. The CRUISE indicator
light (

) in the instrument clus-

ter will illuminate.

2. Accelerate to the desired speed,

which must be more than 40 km/h
(24 mph).

CRUISE CONTROL SYSTEM (IF EQUIPPED)

WARNING

- Cruise 

control

Do not use the cruise control
feature under the following con-
ditions:
• Heavy or unsteady traffic
• Slippery or winding roads
• Situations that involve varying

speeds

WARNING

If the cruise control is left on,
(CRUISE indicator light in the
instrument cluster illuminated)
the cruise control can be
switched on accidentally. Keep
the cruise control system off
(CRUISE indicator light OFF)
when cruise control is not in
use.

OED046010

Summary of Contents for Ceed 2006






























































































































































































































































































































































Reviews:

No comments