manualshive.com logo in svg

Kia Ceed 2006, Owner'S Manual, Page: 151 / 349

Share
Download
Kia Ceed 2006 Owner'S Manual Download Page 151

4 23

Driving your vehicle

To change the steering wheel angle,
pull down (1) the lock release lever,
adjust the steering wheel to the
desired angle (2), then pull up the
lock-release lever to lock the steering
wheel in place.
Be sure to adjust the steering wheel
to the desired position before driving.

Horn

To sound the horn, press the horn
symbol on your steering wheel.
Check the horn regularly to be sure it
operates properly.

CAUTION

• To sound the horn, press the

area indicated by the horn
symbol on your steering
wheel (see illustration). The
horn will operate only when
this area is pressed.

• Do not strike the horn severely

to operate it, or hit it with your
fist. Do not press on the horn
with a sharp-pointed object.

OED046009R

OED046008R

Summary of Contents for Ceed 2006






























































































































































































































































































































































Reviews:

No comments