manualshive.com logo in svg

Kia Ceed 2006, Owner'S Manual, Page: 143 / 349

Share
Download
Kia Ceed 2006 Owner'S Manual Download Page 143

4 15

Driving your vehicle

(Continued)
• Loss of control often occurs if

two or more wheels drop off
the roadway and the driver
oversteers to reenter the road-
way.

• In the event your vehicle

leaves the roadway, do not
steer sharply.

Instead, slow

down before pulling back into
the travel lanes.

• Never exceed posted speed

limits.

WARNING 

If your vehicle becomes stuck in
snow, mud, sand, etc., then you
may attempt to rock the vehicle
free by moving it forward and
backward. Do not attempt this
procedure if people or objects
are anywhere near the vehicle.
During the rocking operation
the vehicle may suddenly move
forward of backward as it
becomes unstuck,

causing

injury or damage to nearby peo-
ple or objects.

Summary of Contents for Ceed 2006






























































































































































































































































































































































Reviews:

No comments