manualshive.com logo in svg

Kia Ceed 2006, Owner'S Manual, Page: 139 / 349

Share
Download
Kia Ceed 2006 Owner'S Manual Download Page 139

4 11

Driving your vehicle

Transaxle ranges

P (park)

This position locks the transaxle and
prevents the front wheels from rotat-
ing. Always come to a complete stop
before shifting into this position.

✽

✽  

NOTICE

The transaxle may be damaged if

you shift into P (Park) whilst the

vehicle is in motion.

CAUTION

• To avoid damage to your

transaxle, do not accelerate
the engine in R (Reverse) or
any forward gear position with
the brakes on.

• When stopped on an upgrade,

do not hold the vehicle sta-
tionary with engine power.
Use the service brake or the
parking brake.

• Do not shift from N (Neutral)

or P (Park) into D (Drive), or R
(Reverse) when the engine is
above idle speed.

(Continued)
• Before leaving the driver’s

seat, always make sure the
shift lever is in the P (PARK)
position.

Set the parking

brake fully, shut the engine off
and take the key with you.
Unexpected and sudden vehi-
cle movement can occur if you
do not follow these precau-
tions in the order specified.

• Never leave a child unattend-

ed in a vehicle.

WARNING

• Shifting into P (Park) whilst

the vehicle is in motion will
cause the drive wheels to lock
which will cause you to lose
control of the vehicle.

• Do not use the P (Park) posi-

tion in place of the parking
brake. Always make sure the
shift lever is latched in the P
(Park) position so that it can-
not be moved AND set the
parking brake fully.

(Continued)

Summary of Contents for Ceed 2006






























































































































































































































































































































































Reviews:

No comments