manualshive.com logo in svg

Kia Ceed 2006, Owner'S Manual, Page: 128 / 349

Share
Download
Kia Ceed 2006 Owner'S Manual Download Page 128

Knowing your vehicle

118

3

CDC / MP3

> Distorted sound/ skips during CD

play.

•  Player cannot read CD. CD is dam-

aged or soiled.

> CD player does not work.
• In cold weather conditions, con-

densation may occur on the laser.

•  With the set on, wait for 5 minutes

until the condensation evaporates.

> No sound during CD playback.
• Some CDs contain multimedia

data which is not recognised by the
unit.

• Advance the tracks until music is

heard.

• See “Notes on audio and MP3

CDs”.

> Problems with new copy-protected

audio CDs.

• Some copy protection procedures

are incompatible with accepted
standards for audio CDs. This is
not a fault on the unit

• See “Notes on audio and MP3

CDs”.

Summary of Contents for Ceed 2006






























































































































































































































































































































































Reviews:

No comments