Home
/
Kia
/
Ceed 2006
/
Owner'S Manual

Kia Ceed 2006, Owner'S Manual, Page: 120 / 349

Share

Page: 120 / 349

Kia Ceed 2006 Owner'S Manual Download Page 120

Knowing your vehicle

110

3

Scan Track

)

Press SCAN button to activate/
deactivate track scan.

9

CD plays the first 10 seconds of
the song.

Listening to MP3

Notes on MP3 files

The following MP3 files are support-
ed by the CD player:

Files conform with MPEG1/2 or
2.5-Layer 3.

The format of the CD must be ISO
9660 Level 1 or Level 2 or Joliet
with sector format in Mode 1 or
Mode 2 Form 1. Other formats
cannot be played reliably.

Up to maximum number of fold-
ers and number of files is 345,
maximum number of folders is
254 (total number of characters
displayed are 24).

Bit rate: Maximum of 320 kbit/s,
constant or variable.

Sampling frequency: Maximum of
48 kHz.

Text display: ID3 tag V1 and ID3
tag V2. MP3 tracks can contain
addition information such as
artist, track and album names
(ID3 tags with maximum not more
than 12 characters). Characters
other than uppercase/lowercase
letters (“Aa to Zz”) and under-
score (“_”) may not be displayed.

Only files with .mp3 extension are
recognized as MP3 files.

The unit may not play the first
track in the order that you wrote
them to the disc.

The unit plays only the first ses-
sion if the disc contains both CD
audio tracks and MP3 files.

When playing a disc of 8k bps or
variable bit rate (VBR), the
elapsed playing time in the display
window may not be correct.

Make sure that a MP3 CD-R/CD-
RW is burned that is formatted as
a data disc and NOT as an audio
disc.

MP3 files are not compatible with
packet write data transfer.

The MP3 symbol will be shown in
the display if an MP3 is being
played.

«
...
118
119
120
121
122
...
»

Summary of Contents for Ceed 2006






























































































































































































































































































































































Reviews:

No comments