manualshive.com logo in svg

Kia Ceed 2006, Owner'S Manual, Page: 112 / 349

Share
Download
Kia Ceed 2006 Owner'S Manual Download Page 112

Knowing your vehicle

102

3

Safety instructions

Notes on USB stick 
(thumb drive)

WARNING 

Make all inputs via the remote
control only when the vehicle is
stationary, or have the passen-
ger make them. Otherwise, you
may endanger the occupants
and other road users.

WARNING 

Avoid inserting any foreign
objects into the slot of this play-
er. Failure to observe this may
cause malfunction due to the
precise mechanism of this unit.

WARNING 

Keep the volume level low
enough to be aware of road and
traffic conditions.

WARNING 

Do not open covers and do not
repair yourself. Refer servicing
to qualified personnel.

WARNING 

• We strongly recommend only

using USB sticks (thumb
drives) of well-known manu-
facturers.

• On no account must other

USB devices such as hard
discs or other digital equip-
ment or multi plug USB hub
be connected to the USB hub.
Connecting other devices can
cause malfunction or even
destroy the audio equipment.

•  Avoid using the USB memory

when it might hinder your
safety driving.

(Continued)

(Continued)
• It is possible that noise is

heard during playback when
using the AUX-IN together
with the power outlet due to
system-related not a malfunc-
tion. If this happens, use the
power source of the AUX
device.

•  In rare cases it is possible that

an USB stick (thumb drive) is
not recognized by the unit or
may cause a malfunction.
Please only use USB sticks
that comply with the USB
thumb drive specifications.

Summary of Contents for Ceed 2006






























































































































































































































































































































































Reviews:

No comments