manualshive.com logo in svg

Kia Ceed 2006, Owner'S Manual, Page: 106 / 349

Share
Download
Kia Ceed 2006 Owner'S Manual Download Page 106

Knowing your vehicle

96

3

In case of an emergency

If the sunroof does not open electri-
cally:
1. Open the sunglass holder.
2. Remove the two (2) screws, and

then remove the overhead con-
sole.

3. Insert the emergency handle (pro-

vided with the vehicle) and turn
the handle clockwise to open or
counterclockwise to close.

CAUTION

• Periodically remove any dirt

that may accumulate on the
guide rail.

• If you try to open the sunroof

when the temperature is
below freezing or when the
sunroof is covered with snow
or ice, the glass or the motor
could be damaged.

• The sunroof is made to slide

together with sunshade. Do
not leave the sunshade closed
whilst the sunroof is open.

OED036067

OED036068

Summary of Contents for Ceed 2006






























































































































































































































































































































































Reviews:

No comments