manualshive.com logo in svg

Kia Ceed 2006, Owner'S Manual, Page: 105 / 349

Share
Download
Kia Ceed 2006 Owner'S Manual Download Page 105

3 95

Knowing your vehicle

Tilting the sunroof  

To open the sunroof (autotilt feature),
press the tilt button (2) on the over-
head console for more than 0.5 sec-
onds.
The sunroof will tilt all the way open.
To stop the sunroof tilting at any
point, press any sunroof control but-
ton.
To close the sunroof, press the close
button (3) on the overhead console
and hold it until the sunroof is closed.

Sunshade  

The sunshade will be opened with
the glass panel automatically when
the glass panel is slid. Close it man-
ually if you want it closed.

OED036064

WARNING

• Be careful that someone’s

head, hands and body are not
trapped by a closing sunroof.

• Do not extend face, neck,

arms or body outside through
the sunroof opening whilst
driving.

• Make sure hand and face are

safely out of the way before
closing a sunroof.

OED036093

Summary of Contents for Ceed 2006






























































































































































































































































































































































Reviews:

No comments