manualshive.com logo in svg

Kia Ceed 2006, Owner'S Manual, Page: 101 / 349

Share
Download
Kia Ceed 2006 Owner'S Manual Download Page 101

3 91

Knowing your vehicle

Sunvisor

Use the sunvisor to shield direct light
through the front or side windows.
To use a sunvisor, pull it downward.
To use a sunvisor for a side window,
pull it downward, unsnap it from the
bracket (1) and swing it to the side.
To use the vanity mirror, pull down
the visor and open the mirror cover
(2).
The vanity mirror lamp (if equipped)
will turn off after closing the mirror
cover or returning the sunvisor to its
original position.

✽

✽

NOTICE

• Close the vanity mirror cover

securely and return the sunvisor

to its original position after use. 

• If the vanity mirror lamp (if

equipped) stays on, it could result

in battery discharge and possible

sunvisor damage.

Power outlet

The power outlets are designed to
provide power for mobile telephones
or other devices designed to operate
with vehicle electrical systems. The
devices should draw less than 10
amps with the engine running.

OED036061R

OED036091R

Summary of Contents for Ceed 2006






























































































































































































































































































































































Reviews:

No comments