Forward* / Reverse Parking Distance Warning (PDW)
8
Forward/Reverse PDW is a supplemental system that is designed to assist the driver by chiming
if any object is detected within the sensing area to the front, rear and side of the vehicle when
moving forward or backing up.
To activate PDW, press the Reverse/Parking Safety button
A
(LED
illuminated). PDW is also activated when the ignition is ON and the
gear shift is moved into R (Reverse). To deactivate PDW, press the
Reverse/Parking Safety button
A
(LED not illuminated).
Auto Defogging System*
Auto Defogging is designed to reduce the fogging up of the inside of the windshield by automatically sensing the moisture on the
inside of the windshield. The system will automatically change to defrost mode when needed.
Auto Defogging is set to ON by default. To cancel Auto Defogging, press the Front Defrost button
for 3 seconds when the ignition
is in on (ADS OFF icon will illuminate). To turn Auto Defogging on again, press the Front Defrost button
for 3 seconds.
Seat Warmers* / Ventilated Seats*
10
Press top/bottom of the button
A
once for high setting (3 LEDs lit). Press the button
twice for medium setting (2 LEDs lit). Press a third time for low setting (1 LED lit) and
again to turn OFF. Hold the button to turn off the Seat Warmers / Ventilated Seats.
Reminder:
Wet or moist clothing may affect seat condition/operation.
Rear-Seat Voice Recognition* / Quiet Mode*
Rear-Seat Voice Recognition allows 2nd-row occupants to control various vehicle functions via voice command, such as adjusting
the audio and temperature controls. On the Home screen, press All Menus > Setup > Voice Recognition. Then turn on the Rear-Seat
Voice Recognition function.
Quiet Mode lets you mute the speakers in the 2nd and 3rd rows to create a quieter environment for sleeping passengers while
allowing front-row occupants to listen to audio through the front speakers. On the Home screen, press All Menus > Setup >
Quiet Mode. Then press Quiet Mode to activate it.
Blind-Spot Collision-Avoidance Assist (BCA)
8
BCA uses rear-corner radar sensors in the rear bumper to monitor and warn the driver in certain
situations if it detects an approaching vehicle in the driver’s blind spot area and before changing
lanes. Initially, BCA provides Blind-Spot Collision Warning (BCW) when it detects a potential collision
with a vehicle, emitting an audible warning and visual alert on the outside rearview mirrors. If the
system detects that the collision risk has increased, BCA automatically applies the opposite-side front
brake to try and mitigate a potential collision.
1st-stage:
When another vehicle is detected within the BCW warning boundary
A
, an indicator
will illuminate on the outside rearview mirrors
B
.
2nd-stage:
When 1st-stage warning is on and the driver activates a turn signal, a flashing indicator
will illuminate on the outside rearview mirrors and the system will sound a warning.
3rd-stage:
When 1st-stage warning is on and the 2nd-stage warning has already occurred, and
the collision risk has increased, braking is applied to the opposite-side front wheel and a visual
warning occurs.
BCA User Settings:
僅 To turn BCA on: With the vehicle at a standstill, the gear shift in Park, and the ignition switch or
Engine Start/Stop button in the ON position, go to the User Settings menu in the Instrument
Cluster. To do so, press the Mode button
C
on the Steering Wheel, then select User Settings
. Press the Move (OK) button
D
up/down and select Driver Assistance > Blind-Spot Safety >
and then press the Move (OK) button
D
.
僅 Some models access settings through the Vehicle Settings in the infotainment system. Press
the Setup hard key on the infotainment system, then
VEHICLE
on the screen to enter
Vehicle Settings.
僅 To set BCA when in Blind-Spot Safety, select either:
—
Active Assist:
BCA will provide a warning (audible and visual) and may activate Electronic
Stability Control (ESC) and temporarily apply braking power.
—
Warning Only:
Vehicle will provide a warning only (audible and visual).
—
Off:
System is off, no warnings provided.
僅 To set the initial warning activation time, go to User Settings , then Driver Assistance,
Warning Time and press the Move (OK) button
D
. You can adjust the warning timing to:
—
Normal:
Maximizes the amount of distance between the vehicles before the initial
warning occurs.
—
Late:
Reduces the amount of distance between the vehicles before the initial warning occurs.
USB Charger Ports, Multimedia USB Port, Power Outlets, and AC Inverter*
USB Charger Ports
*
A
: Are located in the center panel and
in the back of the seats and center console.
Multimedia USB Port
B
: Use the Aux port to connect audio
devices and the Multimedia USB port to connect USB audio
devices and smartphones.
AC Inverter*
:
115V/100W power inverters are located in the
back of the center console and in the luggage compartment.*
Passenger View* / Passenger Talk*
11
Passenger View:
An in-cabin camera helps the front passenger talk with rear passengers
while viewing them on the infotainment system screen. To use it, press the Passenger View
icon
A
on the infotainment system screen.
Passenger Talk:
Press the button
B
located on the overhead console to use the Passenger Talk,
cabin intercom, function.
A
OK
(Buttons located on right side of steering wheel)
B
C
D
A
USB
A
B
A
( Located in the center console
in front of the gear shift)
Passenger
View
A
B
(Buttons located below the gear shift)
W
a
r
m
i
n
g
(
Amber
L
E
D
)
V
e
n
t
i
l
a
t
i
n
g
(
B
l
u
e
L
E
D
)
A
A
