manualshive.com logo in svg

Kia Carnival 2023, Owner'S Manual, Page: 87 / 606

Share
Download
Kia Carnival 2023 Owner'S Manual Download Page 87

Safety features of your vehicle

66

3

Air bag - Advanced Supplemental Restraint System

僅 The curtain air bags are not designed 

to deploy in all side impact or rollover 
situations.

Do not allow the passengers to lean their 
heads or bodies against the doors, put 
their arms on the doors, stretch their 
arms out of the window or place objects 
between the doors and passengers 
when they are seated on seats equipped 
with side impact and/or curtain air bags.

NOTICE

Never try to open or repair any compo

-

nents of the side and curtain air bag sys

-

tem. This should only be done by an 
authorized Kia dealer.

WARNING

No attaching objects

僅 Do not place any objects over the air 

bag. Also, do not attach any objects 
around the area the air bag inflates 
such as the door, side door glass, 
front and rear pillar, roof side rail.

僅 Do not hang hard, breakable, or 

heavy objects on the coat hooks for 
safety reasons.

Summary of Contents for Carnival 2023































































































































































































































































































































































































































































































































































































































Reviews:

No comments