manualshive.com logo in svg

Kia Carnival 2023, Owner'S Manual, Page: 67 / 606

Share
Download
Kia Carnival 2023 Owner'S Manual Download Page 67

Safety features of your vehicle

46

3

Child Restraint System (CRS)

2nd row center seat

2nd row seat (VIP Lounge Seat) (if 

equipped)

3rd row seat

First secure the child restraint with the 
LATCH lower anchors or the seat belt. If 
the child restraint manufacturer recom

-

mends that the top tether strap be 
attached, attach and tighten the top 
tether strap to the top tether strap 
anchor.
Child restraint system tether anchorages 
are located on the back of the rear cush

-

ions.

WARNING

Take the following precautions when 
installing the tether strap:
僅 Read and follow all installation 

instructions provided with your Child 
Restraint System.

僅 NEVER attach more than one child 

restraint to a single tether anchor. 
This could cause the anchor or attach

-

ment to come loose or break.

僅 Do not attach the tether strap to any

-

thing other than the correct tether 
anchor. It may not work properly if 
attached to something else.

僅 Do not use the tether anchors for 

adult seat belts or harnesses, or for 
attaching other items or equipment to 
the vehicle.

僅 Always fasten the seat belts behind 

the child restraint seat when they are 
not used to secure the child seat. Fail

-

ure to do so may result in child stran

-

gulation.

OKA4030151N

OKA4030106

OKA4030108L

Summary of Contents for Carnival 2023































































































































































































































































































































































































































































































































































































































Reviews:

No comments