manualshive.com logo in svg

Kia Carnival 2023, Owner'S Manual, Page: 564 / 606

Share
Download
Kia Carnival 2023 Owner'S Manual Download Page 564

63

7

7

Maintenance

Light bulbs

WARNING

Interior lamps

Prior to working on the Interior lamps, 
ensure that the "OFF" button is 
depressed to avoid burning your fingers 
or receiving an electric shock.

1. Turn off vehicle and disconnect the 

negative terminal from the battery.

2. Using a flat-blade screwdriver, gently 

pry the lamp assembly from interior.

3. Remove the bulb by pulling it straight 

out.

4. Install a new bulb in the socket.
5. Install the lamp assembly to interior.

CAUTION

Be careful not to dirty or damage the 
lens, lens tab, and plastic housings.

Replacing glove box lamp (Bulb 
type)

WARNING

Interior lamps

Prior to working on the Interior lamps, 
ensure that the "OFF" button is 
depressed to avoid burning your fingers 
or receiving an electric shock.

1. Turn off vehicle and disconnect the 

negative terminal from the battery.

2. Using a flat-blade screwdriver, gently 

pry the lamp assembly from interior.

3. Remove the cover from the lamp 

assembly.

4. Remove the bulb by pulling it straight 

out.

5. Install a new bulb in the socket.
6. Install the cover to the lamp assembly.
7. Install the lamp assembly to interior.

CAUTION

Be careful not to dirty or damage the 
lens, lens tab, and plastic housings.

Replacing luggage lamp (Bulb 
type)

WARNING

Interior lamps

Prior to working on the Interior lamps, 
ensure that the "OFF" button is 
depressed to avoid burning your fingers 
or receiving an electric shock.

1. Turn off vehicle and disconnect the 

negative terminal from the battery.

2. Using a flat-blade screwdriver, gently 

pry the lamp assembly from interior.

OKA4070051

OKA4070052

Summary of Contents for Carnival 2023































































































































































































































































































































































































































































































































































































































Reviews:

No comments