manualshive.com logo in svg

Kia Carnival 2023, Owner'S Manual, Page: 562 / 606

Share
Download
Kia Carnival 2023 Owner'S Manual Download Page 562

61

7

7

Maintenance

Light bulbs

Replacing map lamp (Bulb type)

WARNING

Interior lamps

Prior to working on the Interior lamps, 
ensure that the "OFF" button is 
depressed to avoid burning your fingers 
or receiving an electric shock.

1. Turn off vehicle and disconnect the 

negative terminal from the battery.

2. Using a flat-blade screwdriver, gently 

pry the lens cover from lamp housing.

3. Remove the bulb by pulling it straight 

out.

4. Install a new bulb in the socket.
5. Align the lens cover tabs with the 

lamp housing notches and snap the 
lens into place.

CAUTION

Be careful not to dirty or damage the 
lens, lens tab, and plastic housings.

Replacing map lamp (LED type)

If the map lamp (LED) (1) does not oper

-

ate, have your vehicle checked by an 
authorized Kia dealer.
The LED lamp cannot be replaced as a 
single unit because it is an integrated 
unit. The LED lamp has to be replaced 
with the unit.
A skilled technician should check or 
repair the map lamp (LED), for it may 
damage related parts of the vehicle.

Replacing room lamp (Bulb type)

WARNING

Interior lamps

Prior to working on the Interior lamps, 
ensure that the "OFF" button is 

OKA4072049N

OKA4072059N

OKA4070060

Summary of Contents for Carnival 2023































































































































































































































































































































































































































































































































































































































Reviews:

No comments